Amavis not being called from postfix

[Robert Moskowitz]

On 2/8/19 12:02 PM, Patrick Ben Koetter wrote:
> Robert,
>
> * Robert Moskowitz <rgm at htt-consult.com>:
>> The system is CentOS7.
>>
>> My main.cf and master.cf reflect
>> http://www.shisaa.jp/postset/mailserver-1.html
> please send output from these commands to the list:
>
> $ postconf smtpd_milters content_filter smtpd_proxy_filter

smtpd_milters =
content_filter = amavisfeed:[127.0.0.1]:10024
smtpd_proxy_filter =


> $ postconf -Mxf

pickup     unix  n       -       n       60      1       pickup
cleanup    unix  n       -       n       -       0       cleanup
qmgr       unix  n       -       n       300     1       qmgr
tlsmgr     unix  -       -       n       1000?   1       tlsmgr
rewrite    unix  -       -       n       -       - trivial-rewrite
bounce     unix  -       -       n       -       0       bounce
defer      unix  -       -       n       -       0       bounce
trace      unix  -       -       n       -       0       bounce
verify     unix  -       -       n       -       1       verify
flush      unix  n       -       n       1000?   0       flush
proxymap   unix  -       -       n       -       -       proxymap
proxywrite unix  -       -       n       -       1       proxymap
smtp       unix  -       -       n       -       -       smtp
relay      unix  -       -       n       -       -       smtp
showq      unix  n       -       n       -       -       showq
error      unix  -       -       n       -       -       error
retry      unix  -       -       n       -       -       error
discard    unix  -       -       n       -       -       discard
local      unix  -       n       n       -       -       local
virtual    unix  -       n       n       -       -       virtual
lmtp       unix  -       -       n       -       -       lmtp
anvil      unix  -       -       n       -       1       anvil
scache     unix  -       -       n       -       1       scache
Smtpd      pass  -       -       n       -       -       smtpd -v
submission inet  n       -       n       -       -       smtpd -v
     -o syslog_name=postfix/submission -o smtpd_tls_wrappermode=no
     -o smtpd_tls_security_level = encrypt -o smtpd_sasl_auth_enable=yes -o
smtpd_relay_restrictions=permit_mynetworks,permit_sasl_authenticated,defer_unauth_destination
     -o milter_macro_daemon_name=ORIGINATING
pickup     unix  n       -       n       60      1       pickup
     -o content_filter=
relay      unix  -       -       n       -       -       smtp
     -o fallback_relay=
maildrop   unix  -       n       n       -       -       pipe
     flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
uucp       unix  -       n       n       -       -       pipe
     flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail
     ($recipient)
ifmail     unix  -       n       n       -       -       pipe
     flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp      unix  -       n       n       -       -       pipe
     flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop
     $recipient
amavisfeed unix  -       -       y       -       2       lmtp
     -o lmtp_data_done_timeout=1200 -o lmtp_send_xforward_command=yes
     -o disable_dns_lookups=yes -o max_use=20
127.0.0.1:10025 inet n   -       n       -       -       smtpd
     -o content_filter= -o smtpd_delay_reject=no
     -o smtpd_client_restrictions=permit_mynetworks,reject
     -o smtpd_helo_restrictions= -o smtpd_sender_restrictions=
     -o smtpd_recipient_restrictions=permit_mynetworks,reject
     -o smtpd_data_restrictions=reject_unauth_pipelining
     -o smtpd_end_of_data_restrictions= -o smtpd_restriction_classes=
     -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0
     -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000
     -o smtpd_client_connection_count_limit=0
     -o smtpd_client_connection_rate_limit=0
     -o 
receive_override_options=no_header_body_checks,no_unknown_recipient_checks,no_milters,no_address_mappings
     -o local_header_rewrite_clients= -o smtpd_milters= -o 
local_recipient_maps=
     -o relay_recipient_maps=
dovecot    unix  -       n       n       -       -       pipe
     flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d
     ${recipient}
vacation   unix  -       n       n       -       -       pipe
     flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f 
${sender} --
     ${recipient}




> How did you configure amavis to receive mail from Postfix? Does it provide an
> SMTP/LMTP server on port 10024? Do you want it to receive messages via MILTER?

grep -r \$inet_socket_port /etc/amavisd
/etc/amavisd/amavisd.conf:               # option(s) -p overrides 
$inet_socket_port and $unix_socketname
/etc/amavisd/amavisd.conf:$inet_socket_port = 10024;   # listen on this 
local TCP port(s)
/etc/amavisd/amavisd.conf:# $inet_socket_port = [10024,10026];  # listen 
on multiple TCP ports

I would think I want to use MILTER.


>
>> When I run the test message from
>>
>> /usr/share/doc/amavisd-new-2.11.1/test-messages
>>
>> as
>>
>> sendmail -i rgm at test.htt-consult.com < sample-virus-simple.txt
>>
>> all I see in maillog is
>>
>> Feb  8 11:11:45 klovia postfix/pickup[14472]: 3DD4059DA: uid=0 from=<root>
>> Feb  8 11:11:45 klovia postfix/cleanup[14478]: 3DD4059DA:
>> message-id=<20190208161145.3DD4059DA at klovia.htt-consult.com>
>> Feb  8 11:11:45 klovia postfix/qmgr[14473]: 3DD4059DA:
>> from=<root at klovia.htt-consult.com>, size=430, nrcpt=1 (queue active)
>> Feb  8 11:11:45 klovia dovecot: lda(rgm at test.htt-consult.com): sieve:
>> msgid=<20190208161145.3DD4059DA at klovia.htt-consult.com>: stored mail into
>> mailbox 'INBOX'
>> Feb  8 11:11:45 klovia postfix/pipe[14484]: 3DD4059DA:
>> to=<rgm at test.htt-consult.com>, relay=dovecot, delay=1.1,
>> delays=0.8/0.05/0/0.22, dsn=2.0.0, status=sent (delivered via dovecot
>> service)
>> Feb  8 11:11:45 klovia postfix/qmgr[14473]: 3DD4059DA: removed
>>
>> I can't seem to find why amavis is not being called.  HOw do I get debug
>> turned on?  I have tried adding -v to the smtpd lines in master.cf and no
>> change.  Where do I look to get this working?
> Once I have a better idea which setup you want and which you have actually
> configured (see commands above) I will help you do debug.

thanks