Scoring questions

Computer Bob bob at inter-control.com
Mon Jan 29 23:04:35 CET 2018


I will have to wait until one gets through and then pick out the log 
info on it.
As I said most get flagged and delt with correctly, but 2 or 3 an hour 
are getting to the situation in question, meaning they are getting through.


On 1/29/18 3:58 PM, Dino Edwards wrote:
>
> If you are using putty, can you enable logging in your session, send 
> an obviously spam message and send the debug output?
>
> Thanks
>
> *From:*amavis-users 
> [mailto:amavis-users-bounces+dino.edwards=mydirectmail.net at amavis.org] 
> *On Behalf Of *Computer Bob
> *Sent:* Monday, January 29, 2018 4:49 PM
> *To:* amavis-users at amavis.org
> *Subject:* Re: Scoring questions
>
> It starts with debug-sa, stays in the console window and puts does not 
> put debug-sa info into mail.log but displays it at the console that 
> called it.
>
> On 1/29/18 2:33 PM, Dino Edwards wrote:
>
>     Please run amavisd in debug mode.
>
>     Stop the service
>
>     /etc/init.d/amavis stop
>
>     Then start in debug mode:
>
>     /etc/init.d/amavis debug
>
>     Open another session to your mail server and look at you
>     /var/log/mail.log and you should see the following upon amavisd
>     startup (or similar):
>
>     Jan 29 15:30:55.078 mail.domain.tld /usr/sbin/amavisd-new[8330]:
>     initializing Mail::SpamAssassin (0)
>
>     Jan 29 15:30:55.078 mail.domain.tld /usr/sbin/amavisd-new[8330]:
>     SpamAssassin debug facilities: info
>
>     Jan 29 15:30:55.712 mail.domain.tld /usr/sbin/amavisd-new[8330]:
>     SA info: zoom: able to use 315/360 'body_0' compiled rules (87.5%)
>
>     Jan 29 15:30:56.454 mail.domain.tld /usr/sbin/amavisd-new[8330]:
>     SpamAssassin loaded plugins: AskDNS, AutoLearnThreshold, Bayes,
>     BodyEval, Check, DCC, DKIM, DNSEval, FreeMail, HTMLEval,
>     HTTPSMismatch, Hashcash, HeaderEval, ImageInfo, MIMEEval,
>     MIMEHeader, Pyzor, Razor2, RelayEval, ReplaceTags, Rule2XSBody,
>     SPF, SpamCop, URIDNSBL, URIDetail, URIEval, VBounce, WLBLEval,
>     WhiteListSubject
>
>     Jan 29 15:30:56.455 mail.domain.tld /usr/sbin/amavisd-new[8330]:
>     SpamControl: init_pre_fork on SpamAssassin done
>
>     Jan 29 15:30:56.455 mail.domain.tld /usr/sbin/amavisd-new[8330]:
>     extra modules loaded after daemonizing/chrooting:
>     /usr/lib/perl5/auto/NetAddr/IP/InetBase/inet_n2dx.al,
>     Mail/SpamAssassin/CompiledRegexps/body_0.pm,
>     Mail/SpamAssassin/Plugin/FreeMail.pm, Net/DNS/RR/OPT.pm
>
>     *From:*Computer Bob [mailto:bob at inter-control.com]
>     *Sent:* Monday, January 29, 2018 3:24 PM
>     *To:* Dino Edwards <dino.edwards at mydirectmail.net>
>     <mailto:dino.edwards at mydirectmail.net>; amavis-users at amavis.org
>     <mailto:amavis-users at amavis.org>
>     *Subject:* Re: Scoring questions
>
>     Changes made, amavis restarted.
>     I have seen the following on all mails, I just was too lazy to
>     include it because I had to blank the server name...skuza..
>
>     X-Virus-Scanned: Debian amavisd-new at M1-2.myorganization.org
>
>       
>
>       
>
>     On 1/29/18 2:15 PM, Dino Edwards wrote:
>
>         Please try
>
>         $sa_tag_level_deflt = undef;
>
>         In
>
>         /etc/amavis/conf.d/50-user
>
>         Do you see the X-Virus-Scanned header in the emails that
>         amavisd processes?
>
>         *From:*amavis-users
>         [mailto:amavis-users-bounces+dino.edwards=mydirectmail.net at amavis.org]
>         *On Behalf Of *Computer Bob
>         *Sent:* Monday, January 29, 2018 2:40 PM
>         *To:* amavis-users at amavis.org <mailto:amavis-users at amavis.org>
>         *Subject:* Re: Scoring questions
>
>         I also agree that at this point auto learn should be off and
>         cleared as I have done.
>         But I still continue to get garbage mails through showing
>         headers such as:
>
>         X-Spam-Flag: NO
>
>         X-Spam-Score: 0.61
>
>         X-Spam-Level:
>
>         X-Spam-Status: No, score=0.61 tagged_above=-9999 required=5
>
>                  tests=[HTML_FONT_LOW_CONTRAST=0.001, HTML_IMAGE_RATIO_04=0.61,
>
>                  HTML_MESSAGE=0.001, SPF_HELO_PASS=-0.001, SPF_PASS=-0.001,
>
>                  T_REMOTE_IMAGE=0.01, T_RP_MATCHES_RCVD=-0.01]
>
>                  autolearn=no autolearn_force=no
>
>           
>
>         And as I said, when I run them through SA at the command line
>         they seem to score correctly.
>         The scores being given in the headers can't be correct as they
>         all are similarly low and wrong.
>         An interesting note is that if I try and forward one of these
>         received, they get flagged and sent to spam.
>         Without knowing the intricacies of the amavis procedural
>         steps, or were to start, it is not possible for me to
>         troubleshoot.
>
>
>
>         On 1/29/18 1:20 PM, Dino Edwards wrote:
>
>             I disagree it's bad advice considering it's autolearn that seems to be creating at least some of the problems he's experiencing.
>
>               
>
>             However, I do agree, the AutoLearn Threshold should definitely be set IF you are going to be using autolearn but in my experience auto-learn creates more problems than it solves. I believe that only humans should be be used for training the bayes database. Auto-learning has the tendency to exaggerate issues over time.
>
>               
>
>             Keep it simple for now and train your bayes database and after you've trained it and it's scoring well, then consider using autolearn.
>
>               
>
>               
>
>               
>
>               
>
>               
>
>             -----Original Message-----
>
>             From: amavis-users [mailto:amavis-users-bounces+dino.edwards=mydirectmail.net at amavis.org] On Behalf Of Benny Pedersen
>
>             Sent: Monday, January 29, 2018 1:06 PM
>
>             To:amavis-users at amavis.org <mailto:amavis-users at amavis.org>
>
>             Subject: Re: Re: Scoring questions
>
>               
>
>             Computer Bob skrev den 2018-01-29 18:57:
>
>                 I assume you mean bayes_auto_learn in local.cf. I set it to 0 from 1
>
>                 and restarted.
>
>               
>
>             yes its just bad advise, but setting this is what disables autolearn
>
>               
>
>             i suggest see autolearnthreashold instaed
>
>               
>
>             https://spamassassin.apache.org/full/3.3.x/doc/Mail_SpamAssassin_Plugin_AutoLearnThreshold.html
>
>               
>
>             bayes_auto_learn_threshold_nonspam -5
>
>             bayes_auto_learn_threshold_spam 7.5
>
>               
>
>             let the spammers win now :)
>
>               
>
>               
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.amavis.org/pipermail/amavis-users/attachments/20180129/12b442f0/attachment.html>


More information about the amavis-users mailing list